Відео

Titan pillar drill is £89 in Screwfix. Is this a different model

Yes, as beaufighter245 said, very nicely and efficiently done! What about using this jig for making picture frames with 45 degree corners? I would think it might not center well due to the small length of the joined surface. However, with that said, for those of us who only want to do this once in a while the expensive jigs seem an excessive expense. So, again, thanks.

I think the main issue with my prints being bad in the first place was a bad stock extruder. Got this one, calibrating e-steps now and just got the community firmware as well. Much-needed additions honestly.

👍 You nailed it my friend. Thanks again just watched the full video and the adverts for the floor mop,🤣

What are dimensions of the block of oak?

Nice clear video. Like to add one of these to my Metabo KGS216M Compound Mitre Saw. That thing starts with such a jolt if often knocks my workpiece off line.

😅 lern how tu use fance 😂 because it is ok. Sometimes you need to make adjustments and with metabo you can

How can we add text like city name ?

Hi . Really really helped me setup my saw ! Was really dreading it , but cheers for your help, 😊

1/4” collect? Trend doesn’t work on Australia. So I am fighting to find a good router.

Brilliant idea. Now can you think 💭 of making a stand for working on Mobility Scooter by any chance? Look for Pride GoGo Plus Travel Scooter. Take care matey!!! Cheers!!!

Great video thanks from Pearland, Texas

Nice way of doing It. Thanks a lot from Brazil

My bicycle repair station was the ground, never had a problem of it falling over 🤣 Just a general observation .... why do people on YT struggle to hold something down/steady while performing an operation on it ... it would be faster/easier if secured properly 👍

Trying to comment, UA-cam keeps on removing it ... not even being abusive as normal 🤣 .... will keep on trying .....

Can you put a mold in the pressure pot

Every knife is beautiful, the one I liked the most is dark straight knife with resin ❤

Fantastic! I currently work on my own wooden knife, from some quite strong wood named ‘marupa’ in Portuguese. It is always good to see how others do similar projects

Looks very useful. One minor thing I would add is a way to lock the bike in place, to prevent it from being knocked off while it’s being worked on. Something simple like a hole through the two black pieces, for a removable dowel to slot into.

Were the blades the same age with same amout of use?

Hi there, please could I ask what was the name of the bolt and nut that you used that allows the shelf to flip / rotate up and down?

Cool jig! I've got my own, but you've just given me a great idea on how to improve it. Thanks.

great stuff Tomasz will be making those they look great and you looked chuffed they work lol😂

nice one Tomasz am liking the ideas you are coming up with! At least you are building something not like all the tool review channels

Hi Casual DIY, I enjoyed your video, but am confused about the marking and order of the ends to be cut. The video speeds up at a crucial point when the pices are being reset for the second two cuts. Also, please explain why we don’t simply cut A1/B1, A2/B2, etc. Thank, David

well done

Brilliant idea, Tomasz! Really well done! 😃 You could also use leather in the arms there... And the idea to make places to store tools is great as well! Anyway, stay safe there with your family! 🖖😊

@Casual DIY , I obtained the same bed which is 4mm thickness and I also have a CR touch automatic bed leveler for my Ender 3 (not the pro) that has a 4.2.7 board (I believe). are there any videos you recommend to help me to succeed at printing with this style of set up? I also noticed you are not using the included rubber separators that came with the glass bed. Why is that? I al using the rubber spacers but have noticed that it does not correctly level the bed. should I use those with the springs?

Excellent idea Sir 👍🏻👍🏻I will be making one tomorrow

Why do you use the butterfly filter? just curious. It would be hilarious if you used a Fly filter XD, much more accurate.

Full video here - ua-cam.com/video/SqPPd9Y1SdM/v-deo.html

Thanks Tomasz! I wanted a quick reminder to see if a featherboard would help cutting very thin strips and this was perfect. Bonus: I was wondering how to incorporate a router table into my workbench and noticed yours!

When you say, "massive square," how much bigger than your actual design?

Nice one Tomasz will get the wife building one tomorrow if it ever stops raining lol

Another useful addition to the garden 👍 Not criticising, but why didn't you just screw/bolt some crossbeams to a couple of uprights ... to add extra panels you would just screw/bolt the uprights together ...😀 simpler to make and less hardware

Hi, have you managed to solve the dust collection problem yet?

Tomasz, cracking idea and you've definitely saved yourself a bit of cash . Had you purchased a trellis of the size you made, it would have cost you around £50 or more, instead for the £50 you could make a number of them 🫡. It's certainly obvious as to why you made the move back to Poland, you and i both know that you would never have been able to get a garden like the size you now have here in the UK without you having to spend a fortune on a property with land. Just about every house here either has a garden the size of a stamp or no garden whatsoever 🫣😳🤯. As alway's brother 💯% 👍 🇬🇧. P.s how well are the children picking up the Polish language 🤔.

Wo that's pretty good. It's amazing 👏

Wonderful video mate! Thank you for the excellent explanation! Cheers :)

top: 20" x 30" (1- 51cm x 76.2cm) and 22" x 30" (2- 56cm x 76.2cm)

Hi Tom hope you are doing OK I know this video is 6 yeas old but my question to you is I have the evolution rage 5s and want to know what's the biggest kerf blade I could put on my saw .

Fantastic work, Tomasz! Really well done! 😃 Do you plant chayote there? Because chayote soufflé... 🤤 Anyway, stay safe there with your family! 🖖😊

Yo do excellent work my friend and I have learned a great deal from your content!

A clear and informative video. Thank you.

My other channel - Casual Gardening and Cooking - ua-cam.com/channels/KUnO5CbZ5f-XqgTPYjUB5A.html

Thank you, i have a similar jig and wasnt sure how to use it. But after watching your video im now confident i can use it properly. Thank you.

parkside recommended by me remove grease and grease it with synthetic grease , gel

omg you love yourself dont you? 8 minutes to explain what to do when replacing brushes..

I prefer the Titan version personally. It is wider so less suitable for a tight space but able to handle longer work pieces. Double sided support for the stop/rollers too. Saw brackets look identical.